MIL-PRF-2818D
TABLE II. First article inspection.
Inspection
Requirement
Test method
Non-fibrous material (shot content)
3.3
4.5.1
Alkalinity
3.3
4.5.2
Corrosiveness to steel, copper, and aluminum
3.3
4.5.3
Binder content
3.3
4.5.4
Dimensions
3.4
4.5.5
Density
3.3
4.5.5
Thermal conductivity
3.3
4.5.6
Moisture absorption
3.3
4.5.7
Resistance to vibration
3.6
4.5.8
Fire resistance 1/
3.7
4.5.9
Maximum exothermic temperature rise
3.8
4.5.10
Toxicity
3.9
4.5.11
Off-gassing 1/
3.10
4.5.12
1/
Shall be performed when specified (see 6.2).
4.3 Conformance inspection. Conformance inspection shall be in accordance with Table III. The fire
resistance, thermal conductivity, resistance to vibration and maximum exothermic temperature rise conformance
tests only need to be conducted for one of the following reasons:
a. If within 1 year prior to the last test approval date the material has not been tested and found in
compliance with section 3 and Table I (as applicable) or
b. If the material being offered for delivery is not manufactured the same in all respects as that previously
tested.
TABLE III. Conformance inspection.
Inspection
Requirement
Test method
Non-fibrous material (shot content)
3.3
4.5.1
Binder content
3.3
4.5.4
Dimension
3.4
4.5.5
Density
3.3
4.5.5
Thermal conductivity 1/
3.3
4.5.6
Resistance to vibration 1/
3.6
4.5.8
Fire resistance 1/
3.7
4.5.9
Maximum exothermic temperature rise 1/
3.8
4.5.10
1/
Shall be performed when specified (see 6.2).
4.3.1 Testing of the end item. When required by contract or purchase order (see 6.2), conformance
testing specified in 4.5 shall be conducted in accordance with Table IV.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business