MIL-PRF-2818D
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1623 - Fire Performance Requirements and Approved Specifications for Interior
Finish Materials and Furnishings (Naval Shipboard Use).
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or www.dodssp.daps.mil
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
BUREAU OF MEDICINE AND SURGERY (BUMED)
BUMED INST 6270.8 - Procedures for Obtaining Health Hazard Assessments Pertaining to
Operational Use of a Hazardous Material.
(Copies of this document are available online at https://bumed.med.navy.mil or from Bureau of Medicine
and Surgery, Department of the Navy, 2300 E Street, NW, Washington, DC 20372-5300.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA)
S9510-AB-ATM-010 Rev 2 of 30 July 1992 - Nuclear Powered Submarine Atmosphere Control
Manual.
(Copies of this document are available from the Naval Sea Systems Command, Code SEA 05Z9, 1333
Isaac Hull Avenue, SE, Stop 5133, Washington Navy Yard DC 20376-5133.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
C 167 - Standard Test Methods for Thickness and Density of Blanket or Batt Thermal
Insulations. (DoD adopted)
C 177 - Standard Test Method for Steady-State Heat Flux Measurements and Thermal
Transmission Properties by Means of the Guarded-Hot-Plate Apparatus. (DoD adopted)
C 411 - Standard Test Method for Hot-Surface Performance of High-Temperature Thermal
Insulation. (DoD adopted)
C 447 - Standard Practice for Estimating the Maximum Use Temperature of Thermal
Insulations.
C 592 - Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe
Insulation (Metal-Mesh Covered) (Industrial Type). (DoD adopted)
C 665 - Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame
Construction and Manufactured Housing. (DoD adopted)
C 892 - Standard Specification for High-Temperature Fiber Blanket Thermal Insulation.
(Copies of these documents are available from www.astm.org or ASTM International, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business