MIL-PRF-24699A (SH)
4.2 First article inspection. First article inspection shall consist of the tests specified in 4.4 as outlined
in Table XIV.
TABLE XIV. First article inspection.
Inspection
Requirement paragraph
Test paragraph
Dimensions and quantities
Width of rolls (type I)
3.3.1
4.4.1
Quantity of pieces per roll (type I)
3.3.2
4.3.2.1
Size of panels (type II)
3.3.3
4.4.1
Surface density and weight
Surface density
3.4.1
4.4.2.1
Weight of rolls (type I)
3.4.2
4.4.2.2
Breaking force
3.5
4.4.3
Tearing strength (type I)
3.6
4.4.4
Rivet and grommet load bearing strength
3.6.1
4.4.4.1
Flexural rigidity
3.7
4.4.5
Peel strength (type I)
3.8
4.4.6
Fire resistance
Flammability (type I)
3.9.1
4.4.7.1
Smoke density (type I)
3.9.2
4.4.7.2
Noncombustibility (type II)
3.9.3
4.4.7.3
Sound transmission loss
Type I material
3.10.1
4.4.8.1
Type II material
3.10.2
4.4.8.2
Toxicity
3.11
4.4.9
Workmanship
3.12
4.3.2.1
Off-gassing
3.13
4.4.10
4.2.1 Lot. A lot shall consist of all finished material of one size produced in a continuous run (or at the
same time and under the same conditions) and offered for delivery at one time.
4.2.2 The tests specified in 4.4.7, 4.4.8 and 4.4.9 need only be conducted for one of the following
reasons:
a. If within a 3-year period preceding the date of the invitation for bids, the material has not been tested
and found in conformance to 3.9, 3.10, and 3.11, respectively, or
b. If the material offered for delivery is not manufactured the same in all respects as that previously
tested.
4.3 Conformance inspection. Conformance inspection shall be in accordance with Table XV and 4.3.2.
150p7" style="font-size:12px">7
Downloaded: 2014-09-25T13:14Z
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business