MIL-PRF-24699A (SH)
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQC Z1.4 - Sampling Procedures and Tables for Inspection by Attributes. (DoD
adopted)
(Copies of this document are available from www.asq.org or American Society for Quality,
600 North Plankinton Avenue, Milwaukee, WI 53203.)
ASTM INTERNATIONAL
C 1139 - Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing
Blanket and Board for Military Applications.
D 638 - Standard Test Method for Tensile Properties of Plastics. (DoD adopted).
D 2261 - Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip)
Procedure (Constant-Rate-of-Extension Tensile Testing Machine). (DoD adopted)
D 2724 - Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics. (DoD
adopted)
D 3776 - Standard Test Methods for Mass Per Unit Area (Weight) of Fabric. (DoD adopted)
D 5035 - Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip
Method). (DoD adopted)
E 90 - Standard Method for Laboratory Measurement of Airborne Sound Transmission Loss of
Building Partitions and Elements. (DoD adopted)
E 162 - Standard Test Method for Surface Flammability of Materials Using a Radiant Heat
Energy Source. (DoD adopted)
E 662 - Standard Test Method for Specific Optical Density of Smoke Generated by Solid
Materials. (DoD adopted)
E 1123 - Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing
of Naval and Marine Ship Bulkhead Treatment Materials.
(Copies of these documents are available from www.astm.org or ASTM International, 100 Barr Harbor
Drive, West Conshohocken, PA, 19428-2959.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references
cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.2.
3.2 Material. Barrier materials shall be fabricated without the use of any type of asbestos.
3.2.1 Type I. Type I barrier material shall consist of a flexible layer with a woven outer facing. Type I
barrier material shall be fabricated without the use of lead.
3.2.2 Type II. Type II barrier material shall consist of a flexible, noncombustible layer.
3.3 Dimensions and quantities.
3.3.1 Width of rolls (type I). Type I barrier material shall be fabricated in rolls. The width of the rolls
shall be 26, 38, or 48 inches or as specified (see 6.2).
83p3" style="font-size:12px">3
Downloaded: 2014-09-25T13:14Z
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business