MIL-DTL-24688A
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.2).
b.
Conformance inspection (see 4.3).
4.1.1 Inspection conditions. Unless otherwise specified (see 6.2), all inspections shall be performed in
accordance with the test conditions specified herein.
4.2 Qualification inspection. Qualification inspection shall consist of all of the tests listed in table VI.
TABLE VI. Qualification inspection.
Inspection
Requirement
Test
Adhesive
Type II, all classes and Type III, Classes 2, 4, and 6
Dimensions and tolerances
Type I and Type II
Type III
Weights and tolerances
Type I and Type II
Type III
Facing alignment
Type II, Classes 1, 3, 4, and 5 and Type III
Type II, Class 2
Paintability
Type II, Classes 1, 3, 4, and 5 and Type III, Classes
2, 4, and 6
Cutability
Type II
Mass loss by tumbling
Type I and Type III
Corrosiveness
Type I and Type III
Wicking
Type I and Type III
Puncture resistance
Type II, Class 1
Compressibility
Type I, Type II, and Type III, Classes 1 and 2
Type III, Classes 3 and 4
Type III, Classes 5 and 6
Sound absorption
Type I and Type II, Class 2
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business