MIL-DTL-24688A
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-A-3316
-
Adhesives, Fire-Resistant, Thermal Insulation
MIL-C-20079
-
Cloth, Glass; Tape, Textile Glass; and Thread, Glass and Wire-
Reinforced Glass
MIL-PRF-24596
-
Coating Compounds, Nonflaming, Fire-Resistant
MIL-DTL-24607
-
Enamel, Interior, Nonflaming (Dry), Chlorinated Alkyd Resin, Semigloss
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1916
-
DoD Preferred Methods for Acceptance of Product
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9510-AB-ATM-010
- Nuclear Powered Submarine Atmosphere Control Manual
(Copies of the chapter titled "Material Control Program" are available from Commander, Naval Sea Systems
Command, ATTN: SEA 05Z4, 1333 Isaac Hull Avenue, SE, Stop 5122, Washington Navy Yard, DC 20376-5122
or online at https://smcl.dt.navy.mil.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM C177
-
Standard Test Method for Steady State Heat Flux Measurements and
Thermal Transmission Properties by Means of the Guarded Hot Plate
Apparatus
ASTM C302
-
Standard Test Method for Density and Dimensions of Preformed Pipe
Covering Type Thermal Insulation
ASTM C335
-
Standard Test Method for Steady State Heat Transfer Properties of Pipe
Insulation
ASTM C411
-
Standard Test Method for Hot Surface Performance of High Temperature
Thermal Insulation
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business