MIL-PRF-22344E
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1623 - Fire Performance Requirements and Approved Specification for Interior Finish
Materials and Furnishings (Naval Shipboard Use).
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or
www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
BUREAU OF MEDICINE AND SURGERY (BUMED)
BUMED INST 6270.8 - Procedures for Obtaining Health Hazard Assessments Pertaining to
Operational Use of a Hazardous Material.
(Copies of this document are available online at https://bumed.med.navy.mil or from Bureau of Medicine
and Surgery, Department of the Navy, 2300 E Street, NW, Washington, DC 20372-5300.)
2.3 Non-Government publications. The followi ng documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
C 169
- Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass.
(DoD adopted)
C 302 - Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type
Thermal Insulation. (DoD adopted)
C 335 - Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe
Insulation. (DoD adopted)
C 411 - Standard Test Method for Hot-Surface Performance of High-Temperature Thermal
Insulation. (DoD adopted)
D 1193 - Standard Specification for Reagent Water. (DoD adopted)
E 70 -
Standard Test Method for pH of Aqueous Solutions with the Glass Electrode. (DoD
adopted)
(Copies of these documents are available from www.astm.org or ASTM International, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references
cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.2.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business