A-A-52411A
2.5 Material safety data sheet (MSDS). An MSDS shall be prepared in accordance with FED-STD-313 (see 6.2 and 6.5).
2.6 Identification and marking. Unless otherwise specified in the drawing, identification and marking shall be permanent and legible and shall include as a minimum the manufacturer's name, the part number, and the national stock number (NSN). Identification and marking shall be accomplished without adversely affecting the acceptance and function of the finished product.
2.7 Workmanship. Workmanship shall be such that the insulation is uniform in color, mechanical properties and density, and is free of defects which would adversely affect its life, serviceability, or appearance.
3. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4. PRODUCT CONFORMANCE PROVISIONS.
4.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producer’s own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance.
5. PACKAGING. Preservation, packaging, packing, labeling, and marking for the desired level shall be as specified in the contract (see 6.2).
6. NOTES.
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Addresses for obtaining copies of referenced documents.
6.1.1 Government documents. Copies of FED-STD-313 "Materials Safety Data, Transportation Data and Disposal Data for Hazardous Materials" and FED-STD-376 “Preferred Metric Units for General Use by the Federal Government” are available from https://assist.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business