A-A-52404
3. Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
4. Preservation, packaging, packing, labeling, and marking. Preservation, packaging, packing, labeling, and marking for the desired level shall be as specified in the contract (see 5.2).
5. Notes.
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
5.1 Addresses for obtaining copies of referenced documents.
5.1.1 Government specifications and standards. Copies of federal and military specifications and standards are available from the Navy Publications and Printing Service Office, Standardization Document e Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.
5. 1.2 Non-Government publication. ASTM 0395 “Standard Test Methods for Rubber Property Compression Set”; ASTM D412 “Standard Test Method for Rubber Properties in Tension”; and ASTM
D3574 “Standard Method of Testing Flexible Cellular Materials-Slab, Bonded, and Molded urethane Foams” are available from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.
5.2 Ordering data. Acquisition documents must specify the following:
a. Title, number, and date of this commercial item description.
b. Size and PIN of insulation sheet (see 5.3).
c. Dimensions and tolerances (Bee 2.2. I).
d. Color if not as specified (see 2.2.2).
e. Issue of the DODISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 5.1.1 and 5.1.2).
f. Selection of applicable level and packaging requirements (see 4).
5.3 CID based PIN structure. The PINs to be used for insulation sheets acquired to this CID are created as follows:
A 52404 – 1 – X
A = CID number.
1 = Sheet form (see 1.2).
X = Size (see 1.1).
5.4 Cross referenced data. Insulation sheet conforming to this document are interchangeable /substitutable with insulation sheet conforming to MIL-I-14511C.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business