[INCH-POUND]
A-A-52473
September 15, 1993
SUPERSEDING
MIL-I-62521 (AT)
22 July 1987
COMMERCIAL ITEM DESCRIPTION
INSULATION, FLOOR-MAT, THERMAL-BARRIER
The General Services Administrate ion has authorized the use of this commercial item description (CID) as a replacement for MIL-I-62521 (AT) which is canceled.
ASSTRACT
This CID covers insulation material with thermal barrier propertied intended for making floor mats used in military vehicles.
SALIENT CHARACTERISTICS
a. Materials. Unless otherwise specified herein, the materials used shall be in accordance with the manufacturer’s material specifications for floor-mat insulation. The insulation when used within the performance parameters, except when burning, shall not contain any materials which would cause adverse effects on the health of the personnel. The use of recovered material made in compliance with regulatory requirements is acceptable providing that all requirements of this CID are met (see note d).
b. Composition. The insulation shall be a composite consisting of the following.
1. Vinyl. The cover material shall be 0.040 to 0.045 inch-thick deep-twist grain vinyl.
2. Barrier. The barrier shall be bonded between the vinyl and the foam. The barrier shall weigh 0.8 pounds per square foot, and shall have a specific gravity of 2.5 ± percent.
|
Beneficial comments, recommendations, additions, deletions clarifications, etc. and any other data which may improve this document should be sent by letter to: U.S. Army Tank-Automotive Command, ATTN: AMSTA-GDS, Warren, MI 48397-5000. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business