A-A-2231 - Tape, Pressure Sensitive Adhesive (Duct)
This description covers pressure sensitive adhesive duct tape.
A-A-2232 - Tape, Pressure Sensitive Adhesive (Duct)
A-A-2243 - Building Board, Hard Pressed Vegetable Fiber (Hardboard) (S/S By Ansi-A135.4)
A-A-2274 - Wall Covering, Acoustical (Nrc/80)
A-A-2300 - Wall Covering, Acoustical (Nrc/60)
A-A-2304 - Wallboard, Gypsum (Refer To Astm-C36)
A-A-52152 - Insulation Sleeving, Thermal,Tubular (Metric)
This CID covers requirements for tubular, thermal, insulation sleeving, hereinafter called "insulation sleeving". The insulation sleeving is intended for covering heater exhaust ducts, heater ducts or tubes and pipes carrying fluids at elevated temperatures.
A-A-52169 - Insulation; Sound, Vibration, And Thermal
This CID covers the physical, chemical, and performance characteristics of the composite material used to make insulating pads for use on the High Mobility Multipurpose Wheeled Vehicle (HMMWV) series of vehicles and for other similar applications. The insulating pads are used as a thermal, sound, and vibration barrier. The insulating pad is made of five layers of material consisting of the following components: a deep twist outer vinyl wear surface with a cloth reinforcement backing; a sound barrier layer; a closed cell acoustical and thermal foam insulation layer; a high temperature needle mat thermal blanket layer; and a fiberglass cloth reinforced vinyl and mylar backing (see figure 1).
A-A-52404 - Insulation Sheet, Cellular, Plastic: Thermal (Metric)
This commercial item description (CID) covers a unicellular, elastomeric, expanded plastic thermal insulating material whose intended use is to insulate metallic personnel compartment panels of military vehicles, as a thermal barrier for temperatures ranging from 74 deg. C to minus 54 deg. C.
A-A-52411 - Insulation, Molded, Noise Barrier
This commercial item description (CID) covers an expandable, self-skinning insulation material intended for use in applications where a chemical-resistant, sealed, molded noise barrier is required.
A-A-52449 - Insulation, Panel, Vibration-Dampening And Thermal-Barrier
This CID covers requirements for insulation with vibration-dampening and thermal-barrier properties for use on panels in military vehicles.
A-A-52473 - Insulation, Floor-Mat, Thermal-Barrier
This CID covers insulation material with thermal barrier properties intended for making floor mats used in military vehicles.
A-A-52487 - Insulation, Panel Noise-And Thermal-Barrier
This CID covers the physical, and performance characteristics of a composite material used to make insulation panels for use in military vehicles. Insulation panels made from this material are used as noise and thermal barriers.
A-A-902 - Insulation, Thermal (Vermiculite) (S/S By Astm-C516)
A-A-903 - Insulation, Thermal (Expanded Perlite) (S/S By Astm-D3018)
ACI503.1 - Eposy Resin Standards
This standard specification covers the bonding of plastic concrete to hardened concrete with a multi-component epoxy adhesive.
AHA-A135.4 - Standard For Basic Hardboard
This standard defines hardboard, covers requirements and test methods for water resistance, modulus of rupture, tensile strength, surface finish, dimensions, squareness.
CCC-W-408 - Wall Covering, Vinyl-Coated
This specification covers vinyl-coated wall coverings.
FED-STD-259 - Lath, Sheathing, And Wallboard, Gypsum
HH-B-100 - Barrier Material Vapor (For Pipe, Duct And Equipment Thermal Insulation) (S/S By Astm-C1136)
This specification covers vapor barriers (jackets and facings) applied over thermal imsulation for pipes, ducts, and equipment.
HH-C-168 - Cement, Insulation, Thermal, Mineral-Wool (S/S By Ss-C-160)
HH-C-561 - Cork, Compressed (Corkboard) (For Thermal Insulation) (S/S By Hh-I-K525
HH-C-571 - Cork, Granulated, Insulating
HH-I-001084 - Insulation Board, Thermal (Asbestos-Cement Fiberboard)
HH-I-00500 - Insulating Cements, Thermal (S/S By Ss-C-160)
HH-I-00559 - Insulation, Thermal (Mineral Fiber, For Low Temperatures) (S/S By Hh-I-558)
HH-I-00575 - Insulation, Thermal, Polystryene, Expanded
HH-I-1030 - Insulation, Thermal (Mineral Fiber, For Pneumatic Or Poured Application) (S/S By Astm-C764)
HH-I-1252 - Insulation, Thermal, Reflective (Aluminum Foil)
HH-I-1751 - Insulation Sleeving, Thermal (Pipe And Tube Covering)
This specification covers the general requirements for Insulation Sleeving, Thermal (Pipe and Tube Covering). Specific requirements for particular forms, types, styles, classes, and sizes of the products are covered by the applicable detailed specification HH-I-1751/1 through HH-I-1751/5 (see 6.3).
HH-I-1751/1 - Insulation Sleeving, Thermal (Pipe And Tube Covering) Mineral Fiber, Industrial Type
HH-I-1751/2 - Insulation Sleeving, Thermal, (Flexible Unicellular Pipe Covering)
HH-I-1751/3 - Insulation Sleeving, Thermal, Pipe Covering (Cellular Glass)
This specification covers cellular boro-silica glass thermal insulation sleeving used for special purpose.
HH-I-1751/4 - Insulating Sleeving, Thermal, Pipe Covering (Urethane)
This specification covers the requirement for figid cellular urethane thermal insulation fabricated or preformed into standard shapes for pipe and tubing operating within a temperature range of minus 100 deg. F. to plus 220 deg.F.
HH-I-1751/5 - Insulation Sleeving, Thermal, Pipe Covering (Calcium Silicate, For Temperatures Up To 1500 Deg. F)
HH-I-1972 - Insulation Board, Thermal, Faced, Polyurethane Or Polyisocyanurate (S/S By Astm-C1289)
HH-I-1972/1 - Insulation Board, Thermal, Faced, Polyurethane Or Polyisocyanurate
This specification covers the requirements for faced thermal insulation boards composed of rigid cellular polyurethane or polyiscyanurats foam faced with aluminum foil on both sides of the foam. This specification does not cover cryogenic applications. For intended use see 6.1 of HH-I-1972/GEN.
HH-I-1972/2 - Insulation Board, Thermal, Polyurethane Or Polyisocyanurate Faced With Asphalt/Organic Felt, Polymer/Organic Mat, Asphalt/Glass Mat, Or Polymer/Glass Mat On Both Sides Of The Foam
HH-I-1972/3 - Insulation Board, Thermal, Polyurethane Or Polyisocyanurate Faced With Perlite Insulation Board On One Side And Asphalt/Organic Felt Or Asphalt/Glass Fiber Felt On The Other Side Of The Foam
HH-I-1972/4 - Insulation Board, Thermal, Polyurethane Or Polyisocyanurate Faced With Gypsum Board On One Side And Aluminum Foil Or Asphalt/Organic Felt On The Other Side Of The Foam
HH-I-1972/5 - Insulation Board, Thermal, Polyurethane Or Polyisocyanurate Faced With Perlite Board On Both Sides Of The Foam
HH-I-1972/6 - Insulation Board, Thermal, Polyurethane Or Polyisocyanurate Face With Mineral Fiberboard On One Side Of The Foam And Glass Mat On The Other Side Of The Foam
HH-I-515 - Insulation, Thermal (Loose-Fill For Pneumatic Or Poured Application): Cellulosic Or Wood Fiber (S/S By Astm-C739)
HH-I-521 - (
Images) Insulation Blankets, Thermal (Mineral Fiber, For Ambient Temperatures) (S/S By Astm-C665)
This specification covers mineral fiber thermal insulation blankets for use in housing and other framed biuldings at ambient temperatures.
HH-I-523 - Insulation Block And Pipe Covering Thermal (Calcium Silicate, For Temperatures Up To 1,2000 Degrees F.)
HH-I-524 - Insulation Board, Thermal (Polystrene) (S/S By Astm-C578)
HH-I-525 - Insulation Board, Thermal, Cork (Use Astm C 640)
HH-I-526 - Insulation Board, Thermal (Mineral Fiber) (S/S By Astm-C726)
HH-I-527 - Insulation Board, Thermal, (Building Board, High-Strength, Sheating) (Use Lll-I-535A
HH-I-528 - Insulation Batts And Blankets, Thermal (Vegetable Fiber)
HH-I-529 - Insulation Board, Thermal (Mineral Aggregate)
HH-I-530 - Insulation Board, Thermal, Unfaced, Polyurethane Or Polyisocyanurate (S/S By Astm-C591)
HH-I-538 - ( Images) Insulation, Electrical, Pasted-Mica
This specification covers pasted-mica electrical insulation for molded armature slot bases, commutator insulation, shells, heating elements, and other similar insulating purposes.
HH-I-542 - Insulation Felt, Thermal, Mineral Wool (For Low Temperatures) (S/S By Hh-I-558)
HH-I-545 - Insulation, Thermal And Acoustical (Mineral Fiber, Duct Lining Material) (Use Instead Astm-C 1071)
This specification covers mineral fiber insulation for lining the interior surfaces of ducts, plenums, and other air handling equipment, and to provide sound attenuation in systems that handle air up to 250 degrees F.
HH-I-550 - Insulation Sleeving, Thermal (Urethane)
HH-I-551 - Insulation Block And Boards, Thermal (Cellular Glass) (S/S By Astm-C552)
HH-I-552 - Insulation Pipe Covering, Thermal, And Insulation Blanket, Thermal, Pipe Covering (S/S By Hh-I-558)
HH-I-554 - Insulation, Thermal, Magnesia, Block, Pipe And Tubing
HH-I-557 - Insulation, Pipe, Valve And Fitting Covering, Thermal, Cork
HH-I-558 - Insulation, Blankets, Thermal (Mineral Fiber, Industrial Type) (S/S By Astm-C612, Astm-C553, Astm-C592, And Astm-C547)
HH-I-561 - Insulation Block And Sleeving, Thermal (Asbestos-For Temperatures Up To 1200 Deg.
This specification covers asbestos block and pipe covering insulation for use on surfaces operating at temperature up to 1200 degrees F.
HH-I-562 - Insulation, Thermal, Mineral Wool, Block Or Board And Pipe Insulation (Molded Type) (S/S By Hh-I-558)
HH-I-563 - Insulation, Mineral-Wool, Blanket, Felt, And Industrial-Batt (For Heated Surfaces) (S/S By Hh-I-558)
HH-I-564 - Insulation, Mineral-Wool, Block And Board (For Heated Surfaces) (S/S By Hh-I-558)
HH-I-567 - Insulation, Pipe, Laminated Felt (For Temperatures Between 40 Deg. And 212 Deg. F.)
HH-I-570 - Insulation Blanket, Thermal (Asbstos, For Temperatures Up To 1000 Deg F.)
HH-I-573 - Insulation Sleeving, Thermal (S/S By Astm-C534)
HH-I-574 - Insulation, Thermal (Perlite) (S/S By Astm-C549)
HH-I-578 - Insulation, Pipe Covering And Block, Thermal, Vermiculite
This specification covers molded vermiculite block and pipe covering.
HH-I-585 - Insulation, Thermal (Vermiculite) (S/S By Astm-C516)
HH-M-351 - Millboard, Asbestos
HH-M-371 - Mineral-Wool, Blocks And Pipe-Covering (Molded Type) And Felt, Low Temperature (S/S By Hh-I-562)
HH-M-61 - Magnesia, Block, Cement, And Pipe-Covering (Molded) (S/S By Hh-I-554)
HH-P-1784 - Paper, Asbestos
This specification covers asbestos paper.
HH-P-381 - Pipe Covering, Cork, Molded (S/S By Hh-I-557)
HH-P-387 - Pipe-Covering; Mineral-Wool (Molded-Type And Blanket-Type For Heated Pipes) (S/S By Hh-I-552)
HH-T-1782 - ( Images) Tape, Asbestos (S/S By Astm-D315)
LLL-B-1188 - Building Board
LLL-B-800 - Building Board (Wood Particleboard) Hard Pressed, Vegetable Fiber (S/S By Ansi-A208.1)
This specification covers mat formed particleboard for interior or exterior use as specified or as core material to be overlaid with other material.
LLL-B-805 - Building Board, Hard Pressed, Vegetable Fiber, Prefinished Hardboard Panels
LLL-B-810 - ( Images) Building Board, (Hardboard) Hard Pressed, Vegetable Fiber (S/S By Ansi-A135.4)
LLL-F-321 - Fiberboard, Insulating
LLL-H-0060 - Hardboard Panels, Prefinished (S/S By Lll-B-805)
LLL-I-533 - Insulation (Redwood-Bark, Shredded) (S/S By Hh-I-515)
LLL-I-535 - Insulation, Board, Thermal (Cellulosic Fiber) (S/S By Astm-C208, Astm-C532, & Astm-D2277)
MIL-A-23054 - Acoustical Absorptive Board, Fibrous Glass Perforated Fibrous Glass Cloth Faced
This specification covers the requirements for fibrous glass acoustic absorptive board with a perforated fibrous glass cloth facing.
MIL-A-47094 - Asbestos Felt, Unwoven, Phemolic Impregnated
MIL-A-47270 - Asbestos Felt, Phenolic Impregnated
MIL-B-19132 - Blanket, Thermal, Torpedo, Mark 2 Mod 0
MIL-B-19564 - Bedding Compound, Thermal Insulation Pipe Covering
MIL-B-2435 - Building Paper, Vegetable Fiber Or Inorganic Fiber Reinforcement, Reflective (Use Uu-B-1780)
MIL-C-10316 - Cloth, Asbestos (S/S By Ss-C-1783)
MIL-C-11042 - Container, Lead
MIL-C-22608 - Compound, Insulating, High, Temperature
This specification covers high temperature insulating compound in a pastelike form that can be applied by troweling, brushing, and spraying after thinning, after which it hardens and forms an insulating coat on the surace of the material to which applied.
MIL-C-2861 - Cement, Insulation, High Temperature
This specification establishes the requirements for high temperature insulation cement for thermal control of irregular surfaces and for piping operating at temperatures between 100 and 1800 degrees F.
MIL-C-2908 - Cement, Insulation, High Temperature, Finishing (S/S By Ss-C-160 And Astm-C195, C196, C197 Or C449)
MIL-C-46876 - Cement, Carbonaceous
MIL-C-83895 - Compound, Sealing, High Temperature Thermal Barrier
MIL-D-47000 - Damping Material, Sound And Vibration
MIL-DTL-24244 - Insulation Material, With Special Corrosion, Chloride, And Fluoride Requirements
This specification covers asbestos-free thermal insulation, cement and adhesives, all with special corrosion, chloride and fluoride requirements.
MIL-DTL-24688 - Insulation, Thermal And Acoustic Absorptive, Cellular Polyimide Foam
This specification covers thermal and acoustic absorptive cellular polyimide foam insulation for use on bulkheads, overheads, and ventilation ducting. This specification also covers preformed thermal pipe insulation for use on piping operating at temperatures up to 600 degrees F in shipboard applications (see 6.1).
MIL-F-18999 - Felt, Pipe Line, Asbestos, Glass Fiber Reinforced, Coal Tar Saturated
MIL-F-20077 - Felt, Asbestos, Roll (Use Mil-P-52350)
MIL-F-5655 - Felt, Wood Fibre
MIL-I-13042 - Insulation Sleeving, Thermal, Tubular, Flexible (S/S By A-A-52152)
This specification covers flexible braided or woven tubular thermal insulation sleeving intended primarily for covering heater ducts, exhaust pipes, and other tubes in vehicles (see 6.1).
MIL-I-14511 - Insulation Sheet, Cellular, Plastic: Thermal (S/S By A-A-52404)
This specification covers unicellular, elastomeric, expanded plastic thermal insulating material (see 6.1).
MIL-I-15091 - Insulation Felt, Thermal, Asbestos Fiber (Use Mil-I-2781, Mil-I-2819, Mil-I-22023, Mil-I-16411, Mil-I-22344, And Mil-I-23128)
MIL-I-15349 - Insulation Tape, Thermal (S/S By Mil-Std-769)
This specification covers thermal insulating tape for use as an insulation for piping and tubing at temperatures up to 750 Degrees F.
MIL-I-15365 - Insulation Blanket, Acoustical (Use Mil-I-22023)
MIL-I-15475 - Insulation Felt, Thermal, Fibrous Glass, Semirigid
This specification covers fibrous glass felt for insulating ship boiler uptakes. (See 6.2).
MIL-I-16022 - Insulation Felt, Thermal, Fibrous Glass, Flexible (Use Mil-I-22023)
MIL-I-16411 - Insulation Felt, Thermal, Glass Fiber
This document establishes requirements for glass fiber insulation felt for thermal insulation of machinery and equipment.
MIL-I-16688 - Insulation Felt, Thermal, Fibrous Mineral (Semi-Rigid) (Light Weight)
MIL-I-22023 - Insulation Felt, Thermal And Sound Absorbing Felt, Fibrous Glass, Flexible
This specification covers lightweight, faced and unfaced flexible fibrous glass felt for thermal and sound absorbing insulation for use in temperature up to 204 deg. C (400 deg. F).
MIL-I-23128 - Insulation Blanket, Thermal, Refractory Fiber, Flexible
This specification covers asbestos-free flexible refractory fiber blanket thermal insulation for control of machinery and equipment at temperature up to 2000 Deg. F.
MIL-I-2446 - Insulating Kit, For Building Shell, Tropical, Precut Complete, 20 Feet X 54 Feet
MIL-I-24703 - Insulation, Pipe, Polyphosphazene, Sheet And Tubular
This specification establishes the requirements for polyphosphazene elastomeric foam material for thermal insulation on piping.
MIL-I-2781 - Insulation, Pipe, Thermal
This specification establishes the requirements for preformed thermal insulation for use on pipes at surface temperatures up to 1200 degrees F.
MIL-I-46894 - Insulation Paper, Asbestos Chrysolite
MIL-I-46899 - Insulation, Sheet Cork
MIL-I-47047 - Insulation Stock, Thermal
MIL-I-47149 - Insulation Material (Sound And Vibration Barrier)
MIL-I-47198 - Insulation Material, Sheet Form, Glass Fiber, Neoprene Coated
MIL-I-52172 - Insulation Batt, Nylon, Thermal
MIL-I-62520 - Insulation, Molded, Noise-Barrier (S/S By A-A-52411)
MIL-I-62521 - Insulation, Floor-Mat, Thermal-Barrier (S/S By A-A-52473)
MIL-I-62522 - Insulation, Panel, Noise- And Thermal-Barrier (S/S By A-A-52487)
MIL-I-62523 - Insulation, Panel, Vibration-Dampening And Thermal-Barrier (S/S By A-A-52449)
MIL-I-742 - Insulation Board, Thermal, Fibrous Glass
This specification covers a fire-resistive fibrous glass thermal insulation board.
MIL-I-942 - Insulation Batt, Thermal, Fibrous Glass (S/S By Mil-I-15475 And Mil-I-16022)
MIL-L-81293 - Lightweight Sandwich-Constructed Panels (For Asroc Launcher Mk 112)
This specification covers lightweight sandwich-constructed panels for use in the ASROC Launcher MK 112.
MIL-M-47148 - Mat, Asbestos, Unwoven, Phenolic Impregnated
MIL-P-15006 - Paper, Sheathing, Fire Resistent And Water Repellent (Use Uu-B-790)
MIL-P-15280 - Plastic, Material, Unicellular(Sheets And Tubes)
This specification establishes the requirements for chemically expanded plastic foam material for thermal insulation.
MIL-P-2779 - Paper, Asbestos, Corrugated
MIL-P-43110 - Plastic Foam Insulation, Thermal (Polyurethane) (S/S By Mil-P-21929 And Hh-I-530)
MIL-P-52350 - Paper, Asbestos (S/S By Hh-P-1784)
MIL-P-876 - Pipe Insulation, Cork (Fire Resistant Vapor-Barrier Coatings) (Use Hh-I-557 And Mil-C-19565)
MIL-PRF-22344 - Insulation, Pipe, Thermal
This specification establishes the requirements for fibrous pipe insulation for use as thermal control on pipes, valves, and fittings for temperatures up to and including 370 degrees Fahrenheit (Degrees F) (see 3.2 and 3.5).
MIL-PRF-24172 - Insulation, Plastic, Cellular Foam, Rigid, Preformed And Foam-In-Place
This specification establishes the requirements for a rigid cellular foam material.
MIL-PRF-24699 - Acoustical Transmission Loss Barrier Material
This specification covers the requirements for two types of acoustical transmission loss barrier material (see 6.1)
MIL-PRF-2818 - Insulation Blanket, Thermal
This specification establishes the requirements for a metal mesh reinforced thermal insulation blanket.
MIL-PRF-2819 - Insulation Block, Thermal
This specification covers thermal insulation block for use on machinery and equipment at surface temperatures up to the limits for the classes specified.
MIL-STD-2184 - Procedures For Installation, Inspection, Maintenance, And Repair Of- Absorber, Reflector, And Decoupler Acoustic Materials (Request For Issue Other Than Dod Must Be Sent Via Prep Act - Comd., Navseasyscom, Sea 55Z3, Dept Of Navy, Wash Dc 20362-5
MIL-STD-748 - Wallboard (Building Board) Interior Finishing (Gypsum Board. Asbestos-Cement Board)
MIL-STD-769 - Thermal Insulation Requirements For Machinery And Piping
The purpose of this standard is to prescribe the requirements for thermal insulation of piping, machinery, uptakes and mechanical equipment for ships of the U.S. Navy.
MIL-T-4117 - Tape, Asbestos (Use Hh-T-1782)
This specification covers a range of classes, grades, and types of asbestos industrial tapes having heat and chemical resistance, for use as thermal insulation and for other temperature applications.
MIL-W-15427 - Wool, Glass, 1/2 Lb.
MIL-W-3448 - Wallboard: Packaging Of
QPL-14511-1 - Insulation Sheet, Cellular, Plastic, Thermal
QPL-15091-5 - Insulation Felt, Thermal, Asbestos Fiber
QPL-15280-31 - Plastic Material, Unicellular (Sheets And Tubes) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-16411-2 - Insulation Felt, Thermal, Glass Fiber (For Temperatures Up To 1200 Degrees F.)
QPL-16562-3 - Insulation, Synthetic, Rubber-Like Chemically Expanded, Cellular (Sheet-Form)
QPL-19564-20 - Bedding Compound, Thermal Insulation P1Pe Covering
QPL-2781-65 - Insulation, Pipe, Thermal (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-2819-67 - Insulation Block, Thermal (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-876-11 - Pipe Covering, Cork, Molded (Fire-Resistant Vapor-Barrier Coating)
QQ-A-00640 - Aluminum Foil (Insulation, Reflective, Building) (S/S By Hh-I-001252)
SS-A-111 - Acoustic-Materials (For) Plastic Application (S/S By Ss-S-111)
SS-A-118 - Acoustical Units, Prefabricated (S/S By Ss-S-118)
SS-B-750 - Building Board, Asbestos-Cement, Corrugated (S/S By Ss-B-755)
SS-B-755 - Building Board, Asbestos-Cement: Flat And Corrugated (S/S By Astm C220-77 And Astm C221-81)
SS-C-160 - Cements, Insolation Thermal (S/S Byastm-C195, Astm-C196, And Astm-C449 Now Astm-C449/C449M)
SS-C-1783 - Cloth, Asbestos (S/S By Astm-D1571)
SS-C-466 - Cloth, Thread, And Tape-Asbestos (S/S By Astm-D1571 And Astm-D315)
SS-J-570 - Joint Compounds And Tape, Wallboard (For Gypsum Wallboard Construction) (S/S By Astm-C475)
SS-L-30 - Lath & Board Products, Gypsum (S/S By A-A-2304)
SS-P-351 - Pipe And Couplings, Asbestos Cement Pressure (Use Astm C296)
SS-P-431 - Plaster-Board, Gypsum
SS-S-118 - ( Images) Sound Controlling (Acoustical) Tiles And Panels (S/S By Astm-E1264)
This specifiction covers prefabricated acoustical tiles and panels which provides acoustical treatments and interior finish.
SS-S-276 - Sheathing Board, Gypsum
SS-S-283 - Sheets, Flat, Asbestos Cement (S/S By Ss-B-755)
SS-W-0051 - Wallboard, Gypsum
SS-W-51 - Wallboard, Gypsum
UU-B-1780 - Building Paper, Vegetable Fiber Or Inorganic Fiber Reinforcement, Reflective
UU-B-790 - ( Images) Building Paper Vegetable Fiber: (Kraft, Waterproofed, Water Repellent And Fire Resistant)
UU-B-790 - ( Images) Building Paper, Vegetable Fiber: (Kraft, Waterproofed, Water Repellent And Fire Resistant)
UU-P-147 - Paper, Building, Waterproofed (S/S By Uu-B-790
UU-W-101 - Wallboard, Composition (S/S By Lll-B-1188)
W-F-1662 - Fixture, Lighting (Fluorescent Alternating Current, Recessed And Surface Ceiling)
This specification covers recessed and surface ceiling mounted fluorescent lamp lighting fixtures (luminaires) for alternating current service, as specified.
W-F-1662 - Fixture, Lighting (Fluorescent Alternating Current, Recessed And Surface Ceiling)
This specification covers recessed and surface ceiling mounted fluorescent lamp lighting fixtures (luminaires) for alternating current service, as specified.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business